A Craftsman's Notes

The Marvelous Blog

staircase_downstairs_arial

The Details of Remodeling a Staircase

My client in Carmel knew it was time to replace her old oak floors in her entryway, but she also wanted to make sure the new ones matched the wood staircase. If she was going to redo one, she’d have to redo the other at the same time to keep the look consistent. I was called onto the project to tackle the staircase. Though it may appear to be straightforward, remodeling a staircase comes with many design options. My client wanted a more modern look, which we created through our selections and my custom woodworking designs.

Risers:  We decided to paint the risers white and leave the tread a natural wood finish, a current design trend for modern staircases. My client’s skirting boards (trim pieces along the side of the staircase) are also white, so the risers tie into them beautifully. Paying attention to where the paint ends and wood starts in a design greatly affects the overall look. Here the white and wood are paired for sharp contrast, which immediately draws the eye.

stairs_risers and footers_remodeling a staircaseBalusters: It is becoming more popular to mix materials, and adding metal balusters to a wood staircase creates contrast as well as interest. My client loved the dark color and square accents of these balusters, a balance of modern straight-line design with just the right amount of detail.

baluster detail-remodeling a staircaseTreads: When laying tread, is it vital that the wood grain flow with the direction of the staircase. When I build a staircase, I do this instinctively—otherwise, the steps will look weird! Usually people don’t even notice the direction of wood grain until they come upon a staircase where one tread is off. Whenever you strive for consistency, you want to avoid creating distractions that will draw the eye towards them and away from the big picture. Strict attention to detail is how I bring all parts of a project together so there are no goofy mistakes to take away from a beautiful custom piece.

treads sideways-remodeling a staircaseNewel Posts: My client’s original newel posts looked too small, so she asked me to create a wider, bigger post that better matched the scale of the large room and tall staircase. I added a diamond-shaped inlay in the top to give the clean design more punch.

staircase_diamond detailRails and Ends: There is more than one way to end a railing into a wall or a post, and the design that best suits your home will all depend on the situation. Some staircases have half a post added between the railing and the wall, which my client had before in the landing area. The half-post creates more interest and is the best option when you have more room to fill. My client chose the smaller decorative wall piece since I made the new posts wider, and the larger size would have made that space look crowded.

wall mount_ remodling a staircaseMy client loves her remodeled staircase—it not only matches her floors, but is a modern design centerpiece of her home. I have had the pleasure of rebuilding many different staircases, and afford my clients with updated styles and custom touches they can’t find in stores. Questions about this project? Send me an email or call 317.679.5890.

Window arches at Parry Mansion | Historic homes

Working in Historic Homes

Homes built long ago are like time capsules of architecture and style, preserving one-of-a-kind structures from the past. Restoring historic homes is one of Marvelous Woodworking’s specialties. We love studying and recreating the past styles you cannot find in stores and catalogues anymore. Our projects range from repairing existing furniture or architectural details to making new pieces that match the home’s original look.

One of our biggest restoration projects was at the Parry Mansion in central Indianapolis, built around 1900. We worked throughout the house, but our greatest challenge was reconstructing the conservatory windows, French doors and alcove area. Our design was based on careful research of the house’s period style as there were no photographs of the original conservatory, and some of its detailed features had crumbled away. Research is always an important step in our design process—not only do we reference historical pictures, we also take design cues from the rest of the house’s architecture, original furniture and cabinetry.

Parry Mansion finished room

When we restore something, we strive to make it better than before. Here we were able to recreate the beams out of poplar wood, a material that would last longer and be more stable than the original plaster medium.

Milling detail by Doug Marvel, Marvelous WoodworkingThere is always an aspect of ingenuity involved in restoration. For the conservatory windows, the design called for curving arches; we had to create our own process to build these curves. After drawing a template of the existing arches, we created a mold from which we would shape the trim. We used a steam-bending chamber to moisten the wood to make it pliable. This heated trim was bent over the molds and cooled to form.

Custom curve shaping for trim at Parry Mansion project, Marvelous Woodworking

Working in historic homes means we get all sorts of projects. This smaller piece we did for the Benjamin Harrison House in Indianapolis’ Old Northside Historic District, required little work compared to the extensive Parry Mansion project. However, research and attention to detail was still crucial. The Benjamin Harrison house is owned by a museum foundation that keeps it open for tours. They wanted two wooden stands to hold signs for visitors, and they wanted the stands to look original to the home. We visited the house to get a feel for the period style. A chair original to the house had lovely detail which we carried over into our design of the decorative top of the signs. We built the pieces using a special white oak, which was the type of wood used throughout the rest of the house.

Historic Renovation for the Benjamin Harrison HouseHistoric restoration takes a practiced eye and a flexible, masterly approach to woodworking. Older homes pose unique challenges, ones we enjoy tackling and creating equally unique solutions to. Looking for a historic renovation expert, or need custom period-pieces built? Send us an email or give us a call at 317.679.5890.

Project Highlight: Marvelous Woodworking on Animal Planet’s “Tanked”

As custom woodworkers, we are called on for many special projects that require our problem-solving skills and quality craftsmanship. We can come into any home and create a new piece that ties into the existing style of the house so it looks like it’s always been there. However, there are always those projects that take us by surprise. Such an event happened this past November, when Marvelous Woodworking was approached with the opportunity to be part of Animal Planet’s TV show “Tanked”. They were shooting an episode in Indianapolis at the home of basketball player Paul George. The project? Integrate two fish tanks into an existing basement design. The project began almost a year ago when our friend Eric Schneller, owner of local remodeling company Crew Property Improvement Specialists, asked us if we wanted to join him on the Tanked project to create the tanks’ trim. We said yes to this once-in-a-lifetime opportunity. Though we were not building anything big or complicated, this project was one of our most challenging yet. The initial approach to the design was quite impromptu—on the day of the shoot we were told to show up and have some materials and ideas ready without going through an official design process. We walked in with raw materials, rough dimensions, and a few ideas that had been bouncing back and forth between the producers and Mr. George. The day of the shoot came at a furious pace. The fish tanks were shipped to the house and installed in the walls in the morning, and come mid-afternoon it was time for us to do our part; putting the trim and finishing touches onto the tanks to make them look great in the space. We had several constraints—we had to come up with and implement our design all on that day, and we had to do it quietly as filming was going on in another part of the house. Quiet is quite the challenge when you are using saws and power tools! It took every ounce of ingenuity and brain power to quickly put together an aesthetic frame design we all were happy with. Once filming was complete, we came back a few weeks later and worked directly with Mr. George to create a final design that tied into his basement’s style. We found a metallic material he liked and created a backsplash façade over the wall.
To frame the tanks, we crafted PVC trim which offered the flexibility necessary for the accentuated curve of the wall we wanted to follow.
The final result of our hard work was a pair of fish tanks incorporated to truly be part of the style of his basement. This was definitely one of our most challenging projects, but we loved being part of Tanked and creating something beautiful in an Indianapolis home.

Watch the Tanked episode here.

custom fireplace mantel_drawerbenchcabinets | Placing a TV

Placing a TV in Your Home

It used to be that placing a TV in your home meant having a large, sturdy piece of furniture to put it on. While today’s TVs are lighter and more versatile, the number of components attached to them has increased. Many gadgets are converting to wireless technology, but most entertainment systems still have a mess of cords and wires. These accompanying accessories make placing a TV difficult. We at Marvelous Woodworking have seen many beautiful homes that have an odd piece of furniture in the middle of a room with a TV sitting on top of it, cords cascading down the side. The homeowners’ request is always “fix this”. We have found several solutions to this issue.

Hang Your TV Above a Fireplace Mantel

custom fireplace mantle | Placing a TV

The space above a fireplace mantel can be a useful place to mount or place a TV, turning your hearth room into a warm TV room as well. We have seen among homeowners a 50-50 split between those who love and those who hate this look. However, there is a compromise. By installing the unit in a recessed area above the fireplace, one can place a special glass over the cavity to hide the TV when it is off. The glass looks like a normal mirror, but becomes transparent when the TV is on.

Placing a TV above a fireplace mantel does mean you have to get creative with where you put the wires and components. Several of our clients have opted for custom side cabinets to hold accessories, with wires hidden inside the fireplace mantel itself. We at Marvelous Woodworking create hollow custom fireplace mantels that store wires out of sight to make the area look clean and uncluttered. Wires can also be stored inside the wall behind the fireplace. Gas fireplaces that have smaller or no chimneys make a behind-the-wall solution easy, while traditional fireplaces with brick chimneys may need a false wall in order to have space and access to wires. How you manage the cord situation with a TV above the fireplace all depends on what you have in your home already, what you are willing to renovate, and how much space you have to add things.

Store Your TV and All Its Components in Custom Cabinetry

custom built in cabinets | Placing a TV

Xboxes, speakers, wires, sound bars—if you have all these and more, an organized space with doors, shelves and drawers may be your best option. Custom cabinetry can be made to your exact specifications to hold all you have. Wires are easy to hide, and can be made readily accessible with a door directly to them. We have crafted custom cabinets with installed display lights and even a vent to meet the needs of our clients. A cabinet can be built into a wall, or can be free-floating, allowing you flexibility if you live in an older house with fewer outlets available to you. With custom cabinetry, your opportunities for creativity are endless.

Build a Media Wall

Custom Cabinetry_tvcabinet | Placing a TV

Some of our clients want a look that seamlessly integrates their entertainment system together within the room. So we build a media wall, a false wall 4 or 5 feet away from the room’s real wall, with compartments that store all their media equipment. The extra space behind the wall is where all the wires go, and it gives the homeowner access to everything. A media wall can be difficult to build in some homes because there is not enough space. However, in the home above, this media walls works perfectly in this spacious basement area.

Wall-Mounted TVs

TVs are light enough and slim enough to be simply mounted on a wall. However, you still have the same issues of placing components and hiding wires. Custom cabinets or shelves can be made to store components under the TV or on either side.

Placing a TV in a home is a case by case scenario; each space, TV and set of components is different, as well as the style the homeowner wants to achieve. We at Marvelous Woodworking love to find new, unique solutions to each situation in order to best fit the home, the homeowner’s needs and the look they want. You can schedule a design consultation with us by email or by calling (317) 679-5890.